DEUTZ-ALLIS 7110 vs Fiat 110-90 (DT)

8 material differences · fewer than 12

Tractor one

1986–1989

No measured PTO figure

Tractor two

1986–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 7110 and the 110-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7110 and Fiat 110-90 (DT), field by field
Field	7110	110-90 (DT)	Gap
Engine
Engine power, claimed claimed	110.5 hp	109 hp	—
Engine declared	—	FIAT-IVECO 8065.05	—
Displacement declared	—	5.86 L	—
Maximum torque declared	281 lb·ft · 381 N·m	258 lb·ft · 350 N·m	+9% 7110
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	24.0 gpm · 90.8 L/min	15.1 gpm · 57.0 L/min	+59% 7110
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Three-point lift at ends declared	11,464 lb · 5,200 kg	10,002 lb · 4,537 kg	+15% 7110
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,700 lb · 4,400 kg	9,436 lb · 4,280 kg	—
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	105.8 in · 2,687 mm	101.7 in · 2,584 mm	—
Length declared	176.8 in · 4,490 mm	178.9 in · 4,544 mm	—
Width declared	90.5 in · 2,299 mm	77.6 in · 1,970 mm	+17% 7110
Height declared	107.3 in · 2,725 mm	103.3 in · 2,625 mm	—
Ground clearance declared	24.4 in · 620 mm	18.9 in · 481 mm	+29% 7110
Turning radius, braked declared	—	12.5 ft · 3.82 m	—
Fuel tank declared	123.6 qt · 117.0 L	140.5 qt · 133.0 L	+14% 110-90 (DT)

Source

Source