9 material differences · fewer than 12

Tractor oneDEUTZ-ALLIS 62751986–1990No measured PTO figureTractor twoSAME Centurion 75 (DT)1978–1985No measured PTO figure

Which should you choose?

Read our verdict on the 6275 and the Centurion 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6275 and SAME Centurion 75 (DT), field by field
Field	6275	Centurion 75 (DT)	Gap
Engine
Engine power, claimed claimed	73.0 hp	72.0 hp	—
Engine declared	KHD F4L 913	SAME DA 1054 P	differs
Displacement declared	4.09 L	4.15 L	—
Maximum torque declared	187 lb·ft · 254 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.4 gpm · 43.1 L/min	5.8 gpm · 22.0 L/min	+96% 6275
Pressure declared	3,481 psi · 240 bar	2,973 psi · 205 bar	+17% 6275
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,826 lb · 3,550 kg	7,209 lb · 3,270 kg	+9% 6275
Wheelbase declared	91.6 in · 2,327 mm	91.3 in · 2,320 mm	—
Length declared	155.5 in · 3,950 mm	151.2 in · 3,840 mm	—
Width declared	82.3 in · 2,090 mm	76.0–95.7 in · 1,930–2,430 mm	differs
Height, over the cab declared	101.3 in · 2,573 mm	109.4 in · 2,780 mm	+8% Centurion 75 (DT)
Ground clearance declared	18.0 in · 457 mm	20.9 in · 530 mm	+16% Centurion 75 (DT)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	91.9 qt · 87.0 L	126.8 qt · 120.0 L	+38% Centurion 75 (DT)

Source

Source