DEUTZ-ALLIS 6265 or URSUS 4512/4514?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6265 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4512/4514 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 6265 suits loader and hydraulic implement work better on this data: 20% (6.7 L/min / 1.8 gpm) more hydraulic flow and 32% (632 kg / 1,393 lb) more three-point lift.
  • The DEUTZ-ALLIS 6265 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6265 and URSUS 4512/4514, with the call on each
Question62654512/4514Call
Which puts more power through the PTO shaft?48.5 kW (65.0 hp)Traktorenlexikon, “Deutz-Allis 6265”48.5 kW (65.0 hp)Traktorenlexikon, “Ursus 4512/4514”Not comparableNot comparable on power at the PTO shaft: the 6265 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4512/4514 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 6265 and the 4512/4514.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 6265 and the 4512/4514.
Which pumps more oil for implements?40.5 L/min (10.7 gpm)Traktorenlexikon, “Deutz-Allis 6265”33.8 L/min (8.9 gpm)Traktorenlexikon, “Ursus 4512/4514”AheadThe DEUTZ-ALLIS 6265 has 20% more hydraulic flow (6.7 L/min / 1.8 gpm) than the URSUS 4512/4514 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Deutz-Allis 6265”1,968 kg (4,339 lb)Traktorenlexikon, “Ursus 4512/4514”AheadThe DEUTZ-ALLIS 6265 has 32% more lift (632 kg / 1,393 lb) than the URSUS 4512/4514 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,550 kg (7,826 lb)Traktorenlexikon, “Deutz-Allis 6265”2,950 kg (6,504 lb)Traktorenlexikon, “Ursus 4512/4514”Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6265 is 20% heavier (600 kg / 1,323 lb) than the URSUS 4512/4514 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 6265 and the 4512/4514.
Which has the wider choice of gears?12Traktorenlexikon, “Deutz-Allis 6265”8Traktorenlexikon, “Ursus 4512/4514”AheadThe DEUTZ-ALLIS 6265 has 50% more forward gears (4 gears) than the URSUS 4512/4514 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 6265 and the 4512/4514.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 6265”25 km/h (15.5 mph)Traktorenlexikon, “Ursus 4512/4514”AheadThe DEUTZ-ALLIS 6265 has 20% more top speed (5.0 km/h / 3.1 mph) than the URSUS 4512/4514 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Allis 6265”540/1000 rpmTraktorenlexikon, “Ursus 4512/4514”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6265”No figureNo call on PTO independence: not stated for the 4512/4514.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6265”2WD / 4WDTraktorenlexikon, “Ursus 4512/4514”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1986–19891987–2009EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 6265 has 20% more hydraulic flow (6.7 L/min / 1.8 gpm) than the URSUS 4512/4514 (both pump flow, as stated by the source).
  • The DEUTZ-ALLIS 6265 has 32% more lift (632 kg / 1,393 lb) than the URSUS 4512/4514 (both lift at the hitch ends, as stated by the source).
  • The DEUTZ-ALLIS 6265 is 20% heavier (600 kg / 1,323 lb) than the URSUS 4512/4514 (both unladen weight, as stated by the source).
  • The DEUTZ-ALLIS 6265 has 50% more forward gears (4 gears) than the URSUS 4512/4514 (both forward gears, as stated by the source).
  • The DEUTZ-ALLIS 6265 has 20% more top speed (5.0 km/h / 3.1 mph) than the URSUS 4512/4514 (both top speed forward, as stated by the source).
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 6265 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4512/4514 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources