11 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 62651986–1989No measured PTO figureTractor twoURSUS 4512/45141987–2009No measured PTO figure
Which should you choose?
Read our verdict on the 6265 and the 4512/4514 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6265 | 4512/4514 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 65.0 hp | 65.0 hp | — |
| Engine declared | KHD F4L 912 | Ursus 4390 | differs |
| Displacement declared | 3.77 L | 3.87 L | — |
| Maximum torque declared | 167 lb·ft · 227 N·m | 184 lb·ft · 250 N·m | +10% 4512/4514 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 6265 |
| Clutch declared | Independent dry double clutch | Dry Ursus double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.7 gpm · 40.5 L/min | 8.9 gpm · 33.8 L/min | +20% 6265 |
| Pressure declared | — | 3,104–3,249 psi · 214–224 bar | — |
| Three-point lift, at the coupling points declared | 5,732 lb · 2,600 kg | 4,339 lb · 1,968 kg | +32% 6265 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,826 lb · 3,550 kg | 6,504 lb · 2,950 kg | +20% 6265 |
| Wheelbase declared | 91.6 in · 2,327 mm | 87.5 in · 2,223 mm | — |
| Length declared | 155.5 in · 3,950 mm | 147.6 in · 3,750 mm | +5% 6265 |
| Width declared | 82.3 in · 2,090 mm | 73.2–102.4 in · 1,860–2,600 mm | differs |
| Ground clearance declared | 18.0 in · 457 mm | 12.2 in · 310 mm | +47% 6265 |
| Turning radius, braked declared | — | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 91.9 qt · 87.0 L | 84.5 qt · 80.0 L | +9% 6265 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6265 sources
- Source: Traktorenlexikon, “Deutz-Allis 6265”
- Source: Traktorenlexikon, “Deutz D 6006”
URSUS 4512/4514 sources
- Source: Traktorenlexikon, “Ursus 4512/4514”
- Source: Traktorenlexikon, “Ursus 4514”