DEUTZ-ALLIS 6260 vs Fendt Farmer 304 LS

10 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1982–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 6260 and the Farmer 304 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6260 and Fendt Farmer 304 LS, field by field
Field	6260	Farmer 304 LS	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.1 hp	—
Engine declared	KHD F3L 913	MWM D 226.3.2	differs
Displacement declared	3.06 L	3.12 L	—
Maximum torque declared	144 lb·ft · 195 N·m	150 lb·ft · 204 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% Farmer 304 LS
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	12.5 gpm · 47.5 L/min	10.8 gpm · 40.7 L/min	+17% 6260
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,460 lb · 2,930 kg	6,856 lb · 3,110 kg	+6% Farmer 304 LS
Maximum permissible mass declared	11,023 lb · 5,000 kg	10,362 lb · 4,700 kg	+6% 6260
Wheelbase declared	79.2 in · 2,012 mm	90.0 in · 2,285 mm	+14% Farmer 304 LS
Length declared	143.3 in · 3,640 mm	148.8 in · 3,780 mm	—
Width declared	84.2 in · 2,139 mm	74.2 in · 1,885 mm	+13% 6260
Height declared	97.6 in · 2,480 mm	101.3 in · 2,572 mm	—
Ground clearance declared	18.0 in · 457 mm	17.5 in · 445 mm	—
Turning radius, braked declared	11.8 ft · 3.60 m	13.0 ft · 3.97 m	+10% Farmer 304 LS
Fuel tank declared	79.3 qt · 75.0 L	84.5 qt · 80 L	+7% Farmer 304 LS

Source

Source