10 material differences · fewer than 12

Tractor oneDEUTZ-ALLIS 62501986–1990No measured PTO figureTractor twoJohn Deere 1130 (A)1974–1977No measured PTO figure

Which should you choose?

Read our verdict on the 6250 and the 1130 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6250 and John Deere 1130 (A), field by field
Field	6250	1130 (A)	Gap
Engine
Engine power, claimed claimed	50.3 hp	50.3 hp	—
Engine declared	KHD F3L 912	John Deere 3.164 DL-13	differs
Displacement declared	2.83 L	2.70 L	—
Maximum torque declared	122 lb·ft · 166 N·m	136 lb·ft · 185 N·m	+11% 1130 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	11.6 gpm · 43.9 L/min	6.3 gpm · 24.0 L/min	+83% 6250
Pressure declared	—	3,481–4,496 psi · 240–310 bar	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	5,051 lb · 2,291 kg	+19% 6250
Maximum permissible mass declared	11,023 lb · 5,000 kg	7,716 lb · 3,500 kg	+43% 6250
Wheelbase declared	79.2 in · 2,012 mm	80.7 in · 2,050 mm	—
Length declared	137.4 in · 3,490 mm	133.3 in · 3,385 mm	—
Width declared	82.3 in · 2,090 mm	73.4–91.7 in · 1,865–2,330 mm	differs
Height, over the safety frame declared	91.3 in · 2,320 mm	96.1 in · 2,440 mm	—
Ground clearance declared	16.1 in · 410 mm	25.6 in · 650 mm	+59% 1130 (A)
Turning radius, braked declared	—	10.3 ft · 3.13 m	—
Fuel tank declared	79.3 qt · 75.0 L	66.0 qt · 62.5 L	+20% 6250

Source

Source