DEUTZ-ALLIS 6250 vs Fiat 50-66 (DT)

12 material differences

Tractor one

1986–1990

No measured PTO figure

Tractor two

1989–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 6250 and the 50-66 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6250 and Fiat 50-66 (DT), field by field
Field	6250	50-66 (DT)	Gap
Engine
Engine power, claimed claimed	50.3 hp	49.3 hp	—
Engine declared	KHD F3L 912	FIAT-IVECO 8035.06	differs
Displacement declared	2.83 L	2.71 L	—
Maximum torque declared	122 lb·ft · 166 N·m	114 lb·ft · 155 N·m	+7% 6250
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry double clutch	dry Valeo or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	11.6 gpm · 43.9 L/min	8.7 gpm · 32.8 L/min	+34% 6250
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,674 lb · 2,120 kg	+13% 6250
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	4,255 lb · 1,930 kg	+41% 6250
Maximum permissible mass declared	11,023 lb · 5,000 kg	8,488 lb · 3,850 kg	+30% 6250
Wheelbase declared	79.2 in · 2,012 mm	78.7 in · 1,999 mm	—
Length declared	137.4 in · 3,490 mm	127.6 in · 3,241 mm	+8% 6250
Width declared	82.3 in · 2,090 mm	60.6 in · 1,540 mm	+36% 6250
Height declared	91.3 in · 2,320 mm	89.4 in · 2,270 mm	—
Ground clearance declared	16.1 in · 410 mm	14.8 in · 375 mm	+9% 6250
Turning radius, braked declared	—	9.9 ft · 3.03 m	—
Fuel tank declared	79.3 qt · 75.0 L	44.4 qt · 42.0 L	+79% 6250

Source

Source