DEUTZ-ALLIS 6240 vs SOMECA 440 (TD)

14 material differences

Tractor one

1986–1990

No measured PTO figure

Tractor two

1982

No measured PTO figure

Which should you choose?

Read our verdict on the 6240 and the 440 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6240 and SOMECA 440 (TD), field by field
Field	6240	440 (TD)	Gap
Engine
Engine power, claimed claimed	44.0 hp	44.4 hp	—
Engine declared	KHD F3L 912	FIAT-IVECO 8035.02	differs
Displacement declared	2.83 L	2.59 L	+9% 6240
Maximum torque declared	123 lb·ft · 167 N·m	114 lb·ft · 154 N·m	+8% 6240
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 6240
Clutch declared	Independent dry double clutch	Dry FEREDO double clutch	differs
Hydraulics & hitch
Pump flow declared	7.7 gpm · 29.1 L/min	7.1 gpm · 26.8 L/min	+9% 6240
Pressure declared	3,481 psi · 240 bar	2,843 psi · 196 bar	+22% 6240
Three-point lift at ends declared	4,189 lb · 1,900 kg	3,858 lb · 1,750 kg	+9% 6240
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,776 lb · 2,620 kg	4,189 lb · 1,900 kg	+38% 6240
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	76.8 in · 1,950 mm	—
Length declared	137.4 in · 3,490 mm	126.8 in · 3,220 mm	+8% 6240
Width declared	82.3 in · 2,090 mm	65.0 in · 1,650 mm	+27% 6240
Height declared	88.6 in · 2,250 mm	89.8 in · 2,280 mm	—
Ground clearance declared	16.1 in · 410 mm	13.8 in · 350 mm	+17% 6240
Turning radius, braked declared	—	9.7 ft · 2.95 m	—
Fuel tank declared	79.3 qt · 75.0 L	57.1 qt · 54.0 L	+39% 6240

Source

Source