DEUTZ-ALLIS 6240 or Renault 50-12 LB?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault 50-12 LB suits loader and hydraulic implement work better on this data: 45% (13.0 L/min / 3.4 gpm) more hydraulic flow and 13% (240 kg / 529 lb) more three-point lift.
  • The DEUTZ-ALLIS 6240 suits heavy draft work (ploughing, cultivating) better on this data: 31% (615 kg / 1,356 lb) heavier and four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6240 and Renault 50-12 LB, with the call on each
Question624050-12 LBCall
Which puts more power through the PTO shaft?32.8 kW (44.0 hp)Traktorenlexikon, “Deutz-Allis 6240”33.1 kW (44.4 hp)Traktorenlexikon, “Renault 50-12 LB R3201”Not comparableNot comparable on power at the PTO shaft: the 6240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 6240 and the 50-12 LB.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 6240 and the 50-12 LB.
Which pumps more oil for implements?29.1 L/min (7.7 gpm)Traktorenlexikon, “Deutz-Allis 6240”42.1 L/min (11.1 gpm)Traktorenlexikon, “Renault 50-12 LB R3201”AheadThe Renault 50-12 LB has 45% more hydraulic flow (13.0 L/min / 3.4 gpm) than the DEUTZ-ALLIS 6240 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,900 kg (4,189 lb)Traktorenlexikon, “Deutz-Allis 6240”2,140 kg (4,718 lb)Traktorenlexikon, “Renault 50-12 LB R3201”AheadThe Renault 50-12 LB has 13% more lift (240 kg / 529 lb) than the DEUTZ-ALLIS 6240 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,620 kg (5,776 lb)Traktorenlexikon, “Deutz-Allis 6240”2,005 kg (4,420 lb)Traktorenlexikon, “Renault 50-12 LB R3201”Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6240 is 31% heavier (615 kg / 1,356 lb) than the Renault 50-12 LB (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Allis 6240”4,260 kg (9,392 lb)Traktorenlexikon, “Renault 50-12 LB R3201”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “Deutz-Allis 6240”8 to 12Traktorenlexikon, “Renault 50-12 LB R3201”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 6240 and the 50-12 LB.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 6240”30 km/h (18.6 mph)Traktorenlexikon, “Renault 50-12 LB R3201”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Allis 6240”540 rpmTraktorenlexikon, “Renault 50-12 LB R3201”AheadThe DEUTZ-ALLIS 6240 offers 1000 rpm at the PTO, which the Renault 50-12 LB does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6240”independentTraktorenlexikon, “Renault 50-12 LB R3201”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6240”2WDTraktorenlexikon, “Renault 50-12 LB R3201”AheadThe DEUTZ-ALLIS 6240 is available with four-wheel drive; the Renault 50-12 LB is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1986–19901987–1993EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 50-12 LB has 45% more hydraulic flow (13.0 L/min / 3.4 gpm) than the DEUTZ-ALLIS 6240 (both pump flow, as stated by the source).
  • The Renault 50-12 LB has 13% more lift (240 kg / 529 lb) than the DEUTZ-ALLIS 6240 (both lift at the hitch ends, as stated by the source).
  • The DEUTZ-ALLIS 6240 is 31% heavier (615 kg / 1,356 lb) than the Renault 50-12 LB (both unladen weight, as stated by the source).
  • The DEUTZ-ALLIS 6240 offers 1000 rpm at the PTO, which the Renault 50-12 LB does not (as stated by the sources).
  • The DEUTZ-ALLIS 6240 is available with four-wheel drive; the Renault 50-12 LB is two-wheel drive (as stated by the sources).
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO independence: every PTO is independent.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 6240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources