10 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 62401986–1990No measured PTO figureTractor twoRenault 50-12 LB1987–1993No measured PTO figure
Which should you choose?
Read our verdict on the 6240 and the 50-12 LB → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6240 | 50-12 LB | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.0 hp | 44.4 hp | — |
| Engine declared | KHD F3L 912 | KLÖCKNER-HUMBOLD-DEUTZ F3L 912 | differs |
| Displacement declared | 2.83 L | 2.83 L | — |
| Maximum torque declared | 123 lb·ft · 167 N·m | 107 lb·ft · 145 N·m | +15% 6240 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Independent dry double clutch | Dry OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.7 gpm · 29.1 L/min | 11.1 gpm · 42.1 L/min | +45% 50-12 LB |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,776 lb · 2,620 kg | 4,420 lb · 2,005 kg | +31% 6240 |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 9,392 lb · 4,260 kg | +7% 50-12 LB |
| Wheelbase declared | 79.2 in · 2,012 mm | 78.0 in · 1,980 mm | — |
| Length declared | 137.4 in · 3,490 mm | 139.0 in · 3,530 mm | — |
| Width declared | 82.3 in · 2,090 mm | 64.8–88.4 in · 1,645–2,245 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 15.0 in · 380 mm | +8% 6240 |
| Turning radius, braked declared | — | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 79.3 qt · 75.0 L | 65.5 qt · 62.0 L | +21% 6240 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6240 sources
- Source: Traktorenlexikon, “Deutz-Allis 6240”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Renault 50-12 LB sources
- Source: Traktorenlexikon, “Renault 50-12 LB R3201”