DEUTZ-ALLIS 6080 or Fendt Favorit 610 S?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6080 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 6080 suits loader and hydraulic implement work better on this data: 95% (35.1 L/min / 9.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6080 and Fendt Favorit 610 S, with the call on each
Question6080Favorit 610 SCall
Which puts more power through the PTO shaft?61.8 kW (82.9 hp)Traktorenlexikon, “Deutz-Allis 6080”62.2 kW (83.4 hp)Traktorenlexikon, “Fendt Favorit 610 S”Not comparableNot comparable on power at the PTO shaft: the 6080 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 6080 and the Favorit 610 S.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 6080 and the Favorit 610 S.
Which pumps more oil for implements?71.9 L/min (19.0 gpm)Traktorenlexikon, “Deutz-Allis 6080”36.8 L/min (9.7 gpm)Traktorenlexikon, “Fendt Favorit 610 S”AheadThe DEUTZ-ALLIS 6080 has 95% more hydraulic flow (35.1 L/min / 9.3 gpm) than the Fendt Favorit 610 S (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,041 kg (4,500 lb)Traktorenlexikon, “Deutz-Allis 6080”3,000 kg (6,614 lb)Traktorenlexikon, “Fendt Favorit 610 S”Not comparableNot comparable on three-point lift: the 6080: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Allis 6080”); the Favorit 610 S: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fendt Favorit 610 S”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,767 kg (6,100 lb)Traktorenlexikon, “Deutz-Allis 6080”3,855 kg (8,499 lb)Traktorenlexikon, “Fendt Favorit 610 S”Ahead (a fact, not an advantage)The Fendt Favorit 610 S is 39% heavier (1,088 kg / 2,399 lb) than the DEUTZ-ALLIS 6080 (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,500 kg (14,330 lb)Traktorenlexikon, “Fendt Favorit 610 S”No figureNo call on maximum permissible mass: no figure on record for the 6080.
Which has the wider choice of gears?12Traktorenlexikon, “Deutz-Allis 6080”12Traktorenlexikon, “Fendt Favorit 610 S”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 6080 and the Favorit 610 S.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 6080”30 km/h (18.6 mph)Traktorenlexikon, “Fendt Favorit 610 S”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Allis 6080”540/1000 rpmTraktorenlexikon, “Fendt Favorit 610 S”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6080”No figureNo call on PTO independence: not stated for the Favorit 610 S.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6080”2WD / 4WDTraktorenlexikon, “Fendt Favorit 610 S”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1985–19881972–1976Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6080 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 6080 has 95% more hydraulic flow (35.1 L/min / 9.3 gpm) than the Fendt Favorit 610 S (both pump flow, as stated by the source).
  • The Fendt Favorit 610 S is 39% heavier (1,088 kg / 2,399 lb) than the DEUTZ-ALLIS 6080 (both unladen weight, as stated by the source).
  • The DEUTZ-ALLIS 6080 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 6080 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 6080: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Allis 6080”); the Favorit 610 S: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fendt Favorit 610 S”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources