9 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 60601985–1988No measured PTO figureTractor twoVOLVO-BM-VALMET Volvo 5051983–1985No measured PTO figure
Which should you choose?
Read our verdict on the 6060 and the Volvo 505 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 6060 | Volvo 505 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | ALLIS-CHALMERS 433 T | VALMET TD 33 DS 5 | differs |
| Displacement declared | 3.29 L | 3.30 L | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% Volvo 505 |
| Clutch declared | — | Pedal-actuated, dry LuK single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 19.0 gpm · 71.9 L/min | 13.9 gpm · 52.7 L/min | +36% 6060 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,699 lb · 2,585 kg | 7,760 lb · 3,520 kg | +36% Volvo 505 |
| Wheelbase declared | 93.0 in · 2,362 mm | 93.2 in · 2,368 mm | — |
| Length declared | 146.5 in · 3,721 mm | 172.8 in · 4,390 mm | +18% Volvo 505 |
| Width declared | 68.5 in · 1,740 mm | 77.2 in · 1,960 mm | +13% Volvo 505 |
| Ground clearance declared | 20.4 in · 518 mm | 18.3 in · 465 mm | +11% 6060 |
| Turning radius, braked declared | 11.0 ft · 3.34 m | — | — |
| Fuel tank declared | 127.9 qt · 121.0 L | 190.2 qt · 180.0 L | +49% Volvo 505 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6060 sources
- Source: Traktorenlexikon, “Deutz-Allis 6060”
VOLVO-BM-VALMET Volvo 505 sources
- Source: Traktorenlexikon, “Volvo 505”
- Source: Traktorenlexikon, “Valmet 505”