DEUTZ-ALLIS 6060 or SAME Explorer 65 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 65 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 6060 suits loader and hydraulic implement work better on this data: 97% (35.4 L/min / 9.4 gpm) more hydraulic flow.
  • The SAME Explorer 65 (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6060 and SAME Explorer 65 (DT), with the call on each
Question6060Explorer 65 (DT)Call
Which puts more power through the PTO shaft?47.8 kW (64.1 hp)Traktorenlexikon, “Deutz-Allis 6060”47.8 kW (64.1 hp)Traktorenlexikon, “SAME Explorer 65”Not comparableNot comparable on power at the PTO shaft: the 6060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 65 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 6060 and the Explorer 65 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 6060 and the Explorer 65 (DT).
Which pumps more oil for implements?71.9 L/min (19.0 gpm)Traktorenlexikon, “Deutz-Allis 6060”36.5 L/min (9.6 gpm)Traktorenlexikon, “SAME Explorer 65”AheadThe DEUTZ-ALLIS 6060 has 97% more hydraulic flow (35.4 L/min / 9.4 gpm) than the SAME Explorer 65 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,588 kg (3,501 lb)Traktorenlexikon, “Deutz-Allis 6060”3,430 kg (7,562 lb)Traktorenlexikon, “SAME Explorer 65”Not comparableNot comparable on three-point lift: the 6060: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Allis 6060”); the Explorer 65 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Explorer 65”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,585 kg (5,699 lb)Traktorenlexikon, “Deutz-Allis 6060”2,440 kg (5,379 lb)Traktorenlexikon, “SAME Explorer 65”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 6060 and the Explorer 65 (DT).
Which has the wider choice of gears?8Traktorenlexikon, “Deutz-Allis 6060”12 to 20Traktorenlexikon, “SAME Explorer 65”AheadThe SAME Explorer 65 (DT) has 50% more forward gears (4 gears) than the DEUTZ-ALLIS 6060 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 6060 and the Explorer 65 (DT).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Deutz-Allis 6060”30 km/h (18.6 mph)Traktorenlexikon, “SAME Explorer 65”AheadThe SAME Explorer 65 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the DEUTZ-ALLIS 6060 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Deutz-Allis 6060”540 rpmTraktorenlexikon, “SAME Explorer 65”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6060”—No figureNo call on PTO independence: not stated for the Explorer 65 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6060”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Explorer 65”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1985–19881983–1986EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 6060 has 97% more hydraulic flow (35.4 L/min / 9.4 gpm) than the SAME Explorer 65 (DT) (both pump flow, as stated by the source).
  • The SAME Explorer 65 (DT) has 50% more forward gears (4 gears) than the DEUTZ-ALLIS 6060 (both forward gears, as stated by the source).
  • The SAME Explorer 65 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the DEUTZ-ALLIS 6060 (both top speed forward, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 6060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 65 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 6060: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Allis 6060”); the Explorer 65 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Explorer 65”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources