DEUTZ-ALLIS 6060 vs Renault Ceres 75 (A)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6060 and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6060 | Ceres 75 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | ALLIS-CHALMERS 433 T | Perkins LD 80442 | differs |
| Displacement declared | 3.29 L | 3.86 L | +18% Ceres 75 (A) |
| Maximum torque declared | — | 176 lb·ft · 239 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 9.0 gpm · 34.1 L/min | — |
| Three-point lift at ends declared | — | 6,327 lb · 2,870 kg | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,699 lb · 2,585 kg | 6,548 lb · 2,970 kg | +15% Ceres 75 (A) |
| Maximum permissible mass declared | — | 12,125 lb · 5,500 kg | — |
| Wheelbase declared | 93.0 in · 2,362 mm | 93.3 in · 2,369 mm | — |
| Length declared | 146.5 in · 3,721 mm | 155.2 in · 3,941 mm | +6% Ceres 75 (A) |
| Width declared | 68.5 in · 1,740 mm | 73.2 in · 1,860 mm | +7% Ceres 75 (A) |
| Height declared | 103.2 in · 2,621 mm | 99.2 in · 2,520 mm | — |
| Ground clearance declared | 20.4 in · 518 mm | 17.7 in · 450 mm | +15% 6060 |
| Turning radius, braked declared | 11.0 ft · 3.34 m | 12.5 ft · 3.80 m | +14% Ceres 75 (A) |
| Fuel tank declared | 127.9 qt · 121.0 L | 121.5 qt · 115.0 L | — |
DEUTZ-ALLIS 6060 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6060”
Renault Ceres 75 (A) sources
Source
- Source: Traktorenlexikon, “Renault Ceres 75”