DEUTZ-ALLIS 6035 or Ford 1920 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1920 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 6035 suits loader and hydraulic implement work better on this data: 63% (735 kg / 1,620 lb) more three-point lift.
  • The DEUTZ-ALLIS 6035 suits road haulage better on this data: 14% (3.0 km/h / 1.9 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6035 and Ford 1920 (A), with the call on each
Question60351920 (A)Call
Which puts more power through the PTO shaft?24.6 kW (33.0 hp)Traktorenlexikon, “Deutz-Allis 6035”23.5 kW (31.5 hp)Traktorenlexikon, “Ford 1920”Not comparableNot comparable on power at the PTO shaft: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1920 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 6035 and the 1920 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 6035 and the 1920 (A).
Which pumps more oil for implements?—30.0 L/min (7.9 gpm)Traktorenlexikon, “Ford 1920”No figureNo call on hydraulic flow: no figure on record for the 6035.
Which lifts more on the three-point hitch?1,900 kg (4,189 lb)Traktorenlexikon, “Deutz-Allis 6035”1,165 kg (2,568 lb)Traktorenlexikon, “Ford 1920”AheadThe DEUTZ-ALLIS 6035 has 63% more lift (735 kg / 1,620 lb) than the Ford 1920 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,930 kg (4,255 lb)Traktorenlexikon, “Deutz-Allis 6035”1,290 kg (2,844 lb)Traktorenlexikon, “Ford 1920”Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6035 is 50% heavier (640 kg / 1,411 lb) than the Ford 1920 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?3,200 kg (7,055 lb)Traktorenlexikon, “Deutz-Allis 6035”—No figureNo call on maximum permissible mass: no figure on record for the 1920 (A).
Which has the wider choice of gears?8Traktorenlexikon, “Deutz-Allis 6035”12Traktorenlexikon, “Ford 1920”AheadThe Ford 1920 (A) has 50% more forward gears (4 gears) than the DEUTZ-ALLIS 6035 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 6035 and the 1920 (A).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Deutz-Allis 6035”22 km/h (13.7 mph)Traktorenlexikon, “Ford 1920”AheadThe DEUTZ-ALLIS 6035 has 14% more top speed (3.0 km/h / 1.9 mph) than the Ford 1920 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Deutz-Allis 6035”540 rpmTraktorenlexikon, “Ford 1920”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6035”independentTraktorenlexikon, “Ford 1920”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Deutz-Allis 6035”2WDTraktorenlexikon, “Ford 1920”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?19861987–2000EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 6035 has 63% more lift (735 kg / 1,620 lb) than the Ford 1920 (A) (both lift at the hitch ends, as stated by the source).
  • The DEUTZ-ALLIS 6035 is 50% heavier (640 kg / 1,411 lb) than the Ford 1920 (A) (both unladen weight, as stated by the source).
  • The Ford 1920 (A) has 50% more forward gears (4 gears) than the DEUTZ-ALLIS 6035 (both forward gears, as stated by the source).
  • The DEUTZ-ALLIS 6035 has 14% more top speed (3.0 km/h / 1.9 mph) than the Ford 1920 (A) (both top speed forward, as stated by the source).
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1920 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources