7 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 60351986No measured PTO figureTractor twoFord 1920 (A)1987–2000No measured PTO figure
Which should you choose?
Read our verdict on the 6035 and the 1920 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6035 | 1920 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 33.0 hp | 31.5 hp | — |
| Engine declared | KHD F2L 912 | ISHIKAWAJIMA-SHIBAURA N-844 | differs |
| Displacement declared | 1.88 L | 2.00 L | +6% 1920 (A) |
| Maximum torque declared | 86 lb·ft · 117 N·m | 87 lb·ft · 118 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 13.7 mph · 22 km/h | +14% 6035 |
| Clutch declared | — | Pedal-operated, dry DAIKIN double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.9 gpm · 30.0 L/min | — |
| Pressure declared | — | 1,421 psi · 98 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,255 lb · 1,930 kg | 2,844 lb · 1,290 kg | +50% 6035 |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | — | — |
| Wheelbase declared | 73.5 in · 1,867 mm | 69.9 in · 1,775 mm | — |
| Length declared | 131.1 in · 3,330 mm | 126.4 in · 3,210 mm | — |
| Width declared | 63.0 in · 1,600 mm | 59.6–75.0 in · 1,515–1,905 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 12.6 in · 320 mm | +44% 6035 |
| Fuel tank declared | 74.0 qt · 70.0 L | 41.2 qt · 39.0 L | +79% 6035 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6035 sources
- Source: Traktorenlexikon, “Deutz-Allis 6035”
- Source: Traktorenlexikon, “Deutz D 2506”
Ford 1920 (A) sources
- Source: Traktorenlexikon, “Ford 1920”