9 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 60351986No measured PTO figureTractor twoFendt Farmer 1 D1971–1974No measured PTO figure
Which should you choose?
Read our verdict on the 6035 and the Farmer 1 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 6035 | Farmer 1 D | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 33.0 hp | 33.4 hp | — |
| Engine declared | KHD F2L 912 | MWM D 325-3 | differs |
| Displacement declared | 1.88 L | 2.55 L | +35% Farmer 1 D |
| Maximum torque declared | 86 lb·ft · 117 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | — | Single-plate dry clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.6 gpm · 17.6 L/min | — |
| Pressure declared | — | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/600 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,255 lb · 1,930 kg | 3,913 lb · 1,775 kg | +9% 6035 |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | 5,732 lb · 2,600 kg | +23% 6035 |
| Wheelbase declared | 73.5 in · 1,867 mm | 78.5 in · 1,994 mm | +7% Farmer 1 D |
| Length declared | 131.1 in · 3,330 mm | 130.2 in · 3,308 mm | — |
| Width declared | 63.0 in · 1,600 mm | 59.9 in · 1,522 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 16.3 in · 415 mm | +11% 6035 |
| Turning radius, braked declared | — | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 32.8 qt · 31.0 L | +126% 6035 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6035 sources
- Source: Traktorenlexikon, “Deutz-Allis 6035”
- Source: Traktorenlexikon, “Deutz D 2506”
Fendt Farmer 1 D sources
- Source: Traktorenlexikon, “Fendt Farmer 1 D”
- Source: Traktorenlexikon, “Renault 60 R7253”