6 material differences · fewer than 12
Tractor oneClaas Xerion 33002004–2013No measured PTO figureTractor twoNew Holland T 80402006–2011No measured PTO figure
Which should you choose?
Read our verdict on the Xerion 3300 and the T 8040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Xerion 3300 | T 8040 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 300 hp | 303.7 hp | — |
| Engine declared | — | CUMMINS 6 TAA-8304 (TIER-III) | — |
| Displacement declared | — | 8.27 L | — |
| Maximum torque declared | 1,106 lb·ft · 1,500 N·m | 965 lb·ft · 1,309 N·m | +15% Xerion 3300 |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Electro-hydraulically operated wet multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 44.0 gpm · 166.6 L/min | — |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 22,487 lb · 10,200 kg | 21,839 lb · 9,906 kg | — |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 129.9 in · 3,300 mm | 121.2 in · 3,078 mm | +7% Xerion 3300 |
| Length declared | 261.0 in · 6,630 mm | 229.5 in · 5,829 mm | +14% Xerion 3300 |
| Width declared | 98.0 in · 2,490 mm | 98.0 in · 2,490 mm | — |
| Ground clearance declared | 18.5–22.4 in · 470–570 mm | 14.6 in · 372 mm | differs |
| Fuel tank declared | — | 720.7 qt · 682.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Xerion 3300 sources
- Source: Traktorenlexikon, “Claas Xerion 3300”
New Holland T 8040 sources
- Source: Traktorenlexikon, “New Holland T8040”