Claas Xerion 3300 or John Deere 8430?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8430 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Claas Xerion 3300 and John Deere 8430, with the call on each
QuestionXerion 33008430Call
Which puts more power through the PTO shaft?224 kW (300 hp)Traktorenlexikon, “Claas Xerion 3300”217.1 kW (291.1 hp)Traktorenlexikon, “John Deere 8430”Not comparableNot comparable on power at the PTO shaft: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8430 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Xerion 3300 and the 8430.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Xerion 3300 and the 8430.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the Xerion 3300 and the 8430.
Which lifts more on the three-point hitch?11,700 kg (25,794 lb)Traktorenlexikon, “Claas Xerion 3300”11,762 kg (25,931 lb)Traktorenlexikon, “John Deere 8430”Not comparableNot comparable on three-point lift: the Xerion 3300: lift at an unstated point, as stated by the source (Traktorenlexikon, “Claas Xerion 3300”); the 8430: lift at the hitch ends, as stated by the source (Traktorenlexikon, “John Deere 8430”) — not the same quantity, basis and condition.
Which is heavier, for traction?10,200 kg (22,487 lb)Traktorenlexikon, “Claas Xerion 3300”11,260 kg (24,824 lb)Traktorenlexikon, “John Deere 8430”Ahead (a fact, not an advantage)The John Deere 8430 is 10% heavier (1,060 kg / 2,337 lb) than the Claas Xerion 3300 (both unladen weight, as stated by the source).
Which may carry more ballast and load?—14,000 kg (30,865 lb)Traktorenlexikon, “John Deere 8430”No figureNo call on maximum permissible mass: no figure on record for the Xerion 3300.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Claas Xerion 3300”Stepless (CVT)Traktorenlexikon, “John Deere 8430”EvenEven on gears: every machine is stepless.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Xerion 3300 and the 8430.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Claas Xerion 3300”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “John Deere 8430”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Claas Xerion 3300”1000 rpmTraktorenlexikon, “John Deere 8430”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Xerion 3300 and the 8430.
Which drives on both axles?4WDTraktorenlexikon, “Claas Xerion 3300”4WDTraktorenlexikon, “John Deere 8430”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20132006–2009EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 8430 is 10% heavier (1,060 kg / 2,337 lb) than the Claas Xerion 3300 (both unladen weight, as stated by the source).
  • Even on gears: every machine is stepless.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8430 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Xerion 3300: lift at an unstated point, as stated by the source (Traktorenlexikon, “Claas Xerion 3300”); the 8430: lift at the hitch ends, as stated by the source (Traktorenlexikon, “John Deere 8430”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources