7 material differences · fewer than 12
Tractor oneClaas Xerion 33002004–2013No measured PTO figureTractor twoJohn Deere 84302006–2009No measured PTO figure
Which should you choose?
Read our verdict on the Xerion 3300 and the 8430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Xerion 3300 | 8430 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 300 hp | 291.1 hp | — |
| Engine declared | — | John Deere PowerTech-Plus 6.090 HRW-04 | — |
| Displacement declared | — | 8.98 L | — |
| Maximum torque declared | 1,106 lb·ft · 1,500 N·m | 930 lb·ft · 1,261 N·m | +19% Xerion 3300 |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Pedal-operated, hydraulic-wet John Deere multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 22,487 lb · 10,200 kg | 24,824 lb · 11,260 kg | +10% 8430 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 129.9 in · 3,300 mm | 120.1 in · 3,050 mm | +8% Xerion 3300 |
| Length declared | 261.0 in · 6,630 mm | 233.8 in · 5,938 mm | +12% Xerion 3300 |
| Width declared | 98.0 in · 2,490 mm | 118.6–125.6 in · 3,012–3,190 mm | differs |
| Ground clearance declared | 18.5–22.4 in · 470–570 mm | 17.3 in · 440 mm | differs |
| Fuel tank declared | — | 720.0 qt · 681.4 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Xerion 3300 sources
- Source: Traktorenlexikon, “Claas Xerion 3300”
John Deere 8430 sources
- Source: Traktorenlexikon, “John Deere 8430”