10 material differences · fewer than 12
Tractor oneClaas Arion 6402008–2013No measured PTO figureTractor twoDeutz-Fahr Agrotron 6150.4from 2012No measured PTO figure
Which should you choose?
Read our verdict on the Arion 640 and the Agrotron 6150.4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Arion 640 | Agrotron 6150.4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 153 hp | 151.3 hp | — |
| Engine declared | — | Deutz AG TCD 4.1 L04 4V | — |
| Displacement declared | — | 4.04 L | — |
| Maximum torque declared | 485 lb·ft · 657 N·m | 446 lb·ft · 605 N·m | +9% Arion 640 |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 29.1 gpm · 110 L/min | 21.9 gpm · 83.0 L/min | +33% Arion 640 |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,801 lb · 6,260 kg | 12,125 lb · 5,500 kg | +14% Arion 640 |
| Wheelbase declared | 111.0 in · 2,820 mm | 95.2 in · 2,419 mm | +17% Arion 640 |
| Length declared | 203.0 in · 5,155 mm | 178.9–187.9 in · 4,545–4,772 mm | differs |
| Width declared | 100.4 in · 2,550 mm | 81.4–99.5 in · 2,068–2,527 mm | differs |
| Ground clearance declared | 19.7 in · 501 mm | 18.1–21.9 in · 460–555 mm | differs |
| Fuel tank declared | 348.7 qt · 330 L | 243.0 qt · 230 L | +43% Arion 640 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Arion 640 sources
- Source: Traktorenlexikon, “Claas Arion 640”
- Source: OECD test report 2715, 2012
- Source: OECD test report 2715, 2012
Deutz-Fahr Agrotron 6150.4 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6150.4”