Claas Ares 697 ATZ vs Fiat F-140 DT
7 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2005–2007; 1993–1996). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Ares 697 ATZ | F-140 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 138 hp | 138 hp | — |
| Engine declared | — | Fiat-Iveco 8065.25 S | — |
| Displacement declared | — | 5.86 L | — |
| Maximum torque declared | 436 lb·ft · 591 N·m | 376 lb·ft · 510 N·m | +16% Ares 697 ATZ |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pressure declared | 2,901 psi · 200 bar | 3,046 psi · 210 bar | — |
| Three-point lift at ends declared | — | 14,478 lb · 6,567 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,412 lb · 5,630 kg | 12,379 lb · 5,615 kg | — |
| Maximum permissible mass declared | 20,393 lb · 9,250 kg | 18,960 lb · 8,600 kg | +8% Ares 697 ATZ |
| Wheelbase declared | 111.0 in · 2,820 mm | 106.7 in · 2,710 mm | — |
| Length declared | 203.1 in · 5,160 mm | 187.4 in · 4,760 mm | +8% Ares 697 ATZ |
| Width declared | 100.4 in · 2,550 mm | 94.5 in · 2,400 mm | +6% Ares 697 ATZ |
| Height declared | 118.5 in · 3,010 mm | 111.4 in · 2,830 mm | +6% Ares 697 ATZ |
| Fuel tank declared | 264.2 qt · 250 L | 232.5 qt · 220.0 L | +14% Ares 697 ATZ |
Claas Ares 697 ATZ sources
Source
- Source: Traktorenlexikon, “Claas Ares 697 ATZ”
- Source: OECD test report 2295, 2005
Fiat F-140 DT sources
Source
- Source: Traktorenlexikon, “Fiatagri F140 DT”