Claas Ares 657 ATZ vs John Deere 6620
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the Ares 657 ATZ and the 6620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Ares 657 ATZ | 6620 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 123.2 hp | 123 hp | — |
| Engine declared | — | John Deere PowrTech 6.068 HLA-070/V2-DE or 6.068 HL-471/HP | — |
| Displacement declared | — | 6.79 L | — |
| Maximum torque declared | 350 lb·ft · 474.9 N·m | 353 lb·ft · 479.0 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pressure declared | 2,901 psi · 200 bar | 3,017–3,220 psi · 208–222 bar | differs |
| Three-point lift at ends declared | — | 16,755 lb · 7,600 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,089 lb · 5,030 kg | 13,040 lb · 5,915 kg | +18% 6620 |
| Maximum permissible mass declared | 19,401 lb · 8,800 kg | 20,944 lb · 9,500 kg | +8% 6620 |
| Wheelbase declared | 111.0 in · 2,820 mm | 104.3 in · 2,650 mm | +6% Ares 657 ATZ |
| Length declared | 203.1 in · 5,160 mm | 185.2 in · 4,705 mm | +10% Ares 657 ATZ |
| Width declared | 100.4 in · 2,550 mm | 96.3 in · 2,445 mm | — |
| Height declared | 118.5 in · 3,010 mm | 113.2 in · 2,875 mm | — |
| Ground clearance declared | — | 18.1 in · 460 mm | — |
| Fuel tank declared | 264.2 qt · 250 L | 218.7 qt · 207.0 L | +21% Ares 657 ATZ |
Claas Ares 657 ATZ sources
Source
- Source: Traktorenlexikon, “Claas Ares 657 ATZ”
- Source: OECD test report 2294, 2005
John Deere 6620 sources
Source
- Source: Traktorenlexikon, “John Deere 6620”
- Source: OECD test report 2038, 2003