Case-Steyr M 975 a vs Hürlimann H-76 XA

8 material differences · fewer than 12

Tractor one

1995–2004

No measured PTO figure

Tractor two

2005–2009

No measured PTO figure

Which should you choose?

Read our verdict on the M 975 a and the H-76 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr M 975 a and Hürlimann H-76 XA, field by field
Field	M 975 a	H-76 XA	Gap
Engine
Engine power, claimed claimed	74 hp	73.0 hp	—
Engine declared	MWM 301.88 T	Hürlimann 1000.4 W	differs
Displacement declared	—	4.00 L	—
Maximum torque declared	—	190 lb·ft · 257 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Dry double clutch	Electro-hydraulically operated wet SDF multi-disc clutch switchable under load	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	10.9 gpm · 41.4 L/min	8.4 gpm · 31.9 L/min	+30% M 975 a
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	—	6,614 lb · 3,000 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	5,952 lb · 2,700 kg	+15% M 975 a
Maximum permissible mass declared	—	11,464 lb · 5,200 kg	—
Wheelbase declared	87.8 in · 2,229 mm	86.0 in · 2,185 mm	—
Length declared	149.3 in · 3,792 mm	140.2 in · 3,560 mm	+7% M 975 a
Width declared	74.8 in · 1,900 mm	75.6 in · 1,920 mm	—
Height declared	99.0 in · 2,515 mm	94.5 in · 2,400 mm	—
Ground clearance declared	15.7 in · 400 mm	17.1 in · 435 mm	+9% H-76 XA
Fuel tank declared	87.7 qt · 83.0 L	95.1 qt · 90.0 L	+8% H-76 XA

Source

Source