Case-Steyr M 975 a vs Deutz-Fahr DX 80
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the M 975 a and the DX 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | M 975 a | DX 80 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 74 hp | — |
| Engine declared | MWM 301.88 T | KHD F4L 913 | differs |
| Displacement declared | — | 4.09 L | — |
| Maximum torque declared | — | 196 lb·ft · 266 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 10.9 gpm · 41.4 L/min | — | — |
| Pressure declared | — | 1,740 psi · 120 bar | — |
| Three-point lift at ends declared | — | 8,378 lb · 3,800 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,834 lb · 3,100 kg | 7,937 lb · 3,600 kg | +16% DX 80 |
| Wheelbase declared | 87.8 in · 2,229 mm | 91.7 in · 2,330 mm | — |
| Length declared | 149.3 in · 3,792 mm | 159.1 in · 4,040 mm | +7% DX 80 |
| Width declared | 74.8 in · 1,900 mm | 90.6 in · 2,300 mm | +21% DX 80 |
| Height declared | 99.0 in · 2,515 mm | 102.8 in · 2,610 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 23.2 in · 590 mm | +48% DX 80 |
| Fuel tank declared | 87.7 qt · 83.0 L | 126.8 qt · 120 L | +45% DX 80 |
Case-Steyr M 975 a sources
Source
- Source: Traktorenlexikon, “Steyr M 975”
Deutz-Fahr DX 80 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 80”
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”