Case-Steyr M 958 (a) vs Deutz-Fahr DX 3.50

11 material differences · fewer than 12

Tractor one

1996–2001

No measured PTO figure

Tractor two

1984–1996

No measured PTO figure

Which should you choose?

Read our verdict on the M 958 (a) and the DX 3.50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr M 958 (a) and Deutz-Fahr DX 3.50, field by field
Field	M 958 (a)	DX 3.50	Gap
Engine
Engine power, claimed claimed	57.3 hp	59 hp	—
Engine declared	PERKINS 903-27 T	KHD F3L 913	differs
Displacement declared	2.70 L	3.06 L	+13% DX 3.50
Maximum torque declared	136 lb·ft · 184 N·m	144 lb·ft · 195 N·m	+6% DX 3.50
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry Carraro double clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	8.1 gpm · 30.8 L/min	10.0 gpm · 38.0 L/min	+23% DX 3.50
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,894 lb · 2,220 kg	5,291 lb · 2,400 kg	+8% DX 3.50
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	6,019–6,878 lb · 2,730–3,120 kg	differs
Maximum permissible mass declared	9,259 lb · 4,200 kg	10,141 lb · 4,600 kg	+10% DX 3.50
Wheelbase declared	83.3 in · 2,117 mm	79.2 in · 2,012 mm	—
Length declared	139.0 in · 3,530 mm	142.9 in · 3,630 mm	—
Width declared	74.4 in · 1,890 mm	84.2 in · 2,138 mm	+13% DX 3.50
Height declared	87.8 in · 2,230 mm	92.5–103.1 in · 2,350–2,620 mm	differs
Ground clearance declared	16.1 in · 410 mm	18.0 in · 457 mm	+11% DX 3.50
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	77.1 qt · 73.0 L	—	—

Source

Source