Case-Steyr M 948 (a) vs Lamborghini R 483 (DT)

13 material differences

Tractor one

1996–2001

No measured PTO figure

Tractor two

1982–1985

No measured PTO figure

Which should you choose?

Read our verdict on the M 948 (a) and the R 483 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-Steyr M 948 (a) and Lamborghini R 483 (DT), field by field
Field	M 948 (a)	R 483 (DT)	Gap
Engine
Engine power, claimed claimed	47.3 hp	47.3 hp	—
Engine declared	PERKINS 903-27	SAME 983-L	differs
Displacement declared	2.70 L	2.72 L	—
Maximum torque declared	155 lb·ft · 210 N·m	134 lb·ft · 182 N·m	+15% M 948 (a)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry Carraro double clutch	Dry VALEO double clutch	differs
Hydraulics & hitch
Pump flow declared	8.1 gpm · 30.8 L/min	6.6 gpm · 25.0 L/min	+23% M 948 (a)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,894 lb · 2,220 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	4,321 lb · 1,960 kg	+20% M 948 (a)
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	78.9 in · 2,004 mm	+6% M 948 (a)
Length declared	139.0 in · 3,530 mm	129.9 in · 3,300 mm	+7% M 948 (a)
Width declared	74.4 in · 1,890 mm	61.8 in · 1,570 mm	+20% M 948 (a)
Height declared	91.7 in · 2,330 mm	84.3 in · 2,140 mm	+9% M 948 (a)
Ground clearance declared	16.1 in · 410 mm	18.5 in · 470 mm	+15% R 483 (DT)
Fuel tank declared	77.1 qt · 73.0 L	42.3 qt · 40.0 L	+83% M 948 (a)

Source

Source