Case-Steyr M 948 (a) vs Fendt Farmer 102 LS/LSA

10 material differences · fewer than 12

Tractor one

1996–2001

No measured PTO figure

Tractor two

1981–1982

No measured PTO figure

Which should you choose?

Read our verdict on the M 948 (a) and the Farmer 102 LS/LSA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Case-Steyr M 948 (a) and Fendt Farmer 102 LS/LSA, field by field
Field	M 948 (a)	Farmer 102 LS/LSA	Gap
Engine
Engine power, claimed claimed	47.3 hp	47.1 hp	—
Engine declared	PERKINS 903-27	MWM D 226.3.2	differs
Displacement declared	2.70 L	3.12 L	+15% Farmer 102 LS/LSA
Maximum torque declared	155 lb·ft · 210 N·m	135 lb·ft · 183 N·m	+15% M 948 (a)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Carraro double clutch	Single-plate dry clutch	differs
Hydraulics & hitch
Pump flow declared	8.1 gpm · 30.8 L/min	8.5 gpm · 32.3 L/min	—
Pressure declared	3,481 psi · 240 bar	2,489 psi · 172 bar	+40% M 948 (a)
Three-point lift at ends declared	4,894 lb · 2,220 kg	4,453 lb · 2,020 kg	+10% M 948 (a)
Rear PTO speeds declared	540/1000 rpm	540/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	5,324 lb · 2,415 kg	—
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	81.8 in · 2,078 mm	—
Length declared	139.0 in · 3,530 mm	144.5 in · 3,670 mm	—
Width declared	74.4 in · 1,890 mm	68.0 in · 1,726 mm	+10% M 948 (a)
Height declared	91.7 in · 2,330 mm	91.3 in · 2,320 mm	—
Ground clearance declared	16.1 in · 410 mm	15.0 in · 380 mm	+8% M 948 (a)
Turning radius, braked declared	—	11.2 ft · 3.40 m	—
Fuel tank declared	77.1 qt · 73.0 L	77.1 qt · 73 L	—

Source

Source