Case-Steyr M 9094 a vs VALMET 6400-4

10 material differences · fewer than 12

Tractor one

1994–2003

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the M 9094 a and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr M 9094 a and VALMET 6400-4, field by field
Field	M 9094 a	6400-4	Gap
Engine
Engine power, claimed claimed	92.8 hp	93.7 hp	—
Engine declared	Steyr-MWM WD 401.85	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	4.16 L	4.40 L	+6% 6400-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	18.0 gpm · 68.2 L/min	—
Three-point lift at ends declared	9,480 lb · 4,300 kg	—	—
Rear PTO speeds declared	430/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	9,259 lb · 4,200 kg	+6% 6400-4
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,535 lb · 7,500 kg	+15% 6400-4
Wheelbase declared	97.7 in · 2,481 mm	91.6 in · 2,326 mm	+7% M 9094 a
Length declared	165.9 in · 4,215 mm	173.5 in · 4,408 mm	—
Width declared	85.4 in · 2,170 mm	78.1 in · 1,985 mm	+9% M 9094 a
Height declared	100.4 in · 2,550 mm	107.7 in · 2,735 mm	+7% 6400-4
Ground clearance declared	17.3 in · 440 mm	18.1 in · 460 mm	—
Turning radius, braked declared	14.1 ft · 4.30 m	13.8 ft · 4.20 m	—
Fuel tank declared	105.7 qt · 100.0 L	174.4 qt · 165.0 L	+65% 6400-4

Source

Source