Case-Steyr M 9094 a vs John Deere 2800 (A)

10 material differences · fewer than 12

Tractor one

1994–2003

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the M 9094 a and the 2800 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Case-Steyr M 9094 a and John Deere 2800 (A), field by field
Field	M 9094 a	2800 (A)	Gap
Engine
Engine power, claimed claimed	92.8 hp	93.7 hp	—
Engine declared	Steyr-MWM WD 401.85	ZETOR 1001	differs
Displacement declared	4.16 L	4.16 L	—
Maximum torque declared	—	277 lb·ft · 376 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated dry Zetor single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	—	11.3 gpm · 42.9 L/min	—
Pressure declared	—	2,350 psi · 162 bar	—
Three-point lift at ends declared	9,480 lb · 4,300 kg	8,598 lb · 3,900 kg	+10% M 9094 a
Rear PTO speeds declared	430/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	8,157 lb · 3,700 kg	+7% M 9094 a
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,535 lb · 7,500 kg	+15% 2800 (A)
Wheelbase declared	97.7 in · 2,481 mm	93.5 in · 2,375 mm	—
Length declared	165.9 in · 4,215 mm	165.0 in · 4,190 mm	—
Width declared	85.4 in · 2,170 mm	76.8 in · 1,950 mm	+11% M 9094 a
Height declared	100.4 in · 2,550 mm	104.1 in · 2,645 mm	—
Ground clearance declared	17.3 in · 440 mm	11.0 in · 279 mm	+58% M 9094 a
Turning radius, braked declared	14.1 ft · 4.30 m	12.7 ft · 3.87 m	+11% M 9094 a
Fuel tank declared	105.7 qt · 100.0 L	111.0 qt · 105.0 L	—

Source

Source