Case-Steyr 9125 a vs John Deere 6620

11 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 9125 a and the 6620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr 9125 a and John Deere 6620, field by field
Field	9125 a	6620	Gap
Engine
Engine power, claimed claimed	123 hp	123 hp	—
Engine declared	Steyr-VALMET WD 620.82	John Deere PowrTech 6.068 HLA-070/V2-DE or 6.068 HL-471/HP	differs
Displacement declared	6.60 L	6.79 L	—
Maximum torque declared	333 lb·ft · 452 N·m	353 lb·ft · 479.0 N·m	+6% 6620
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal operated wet ZF multi disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	21.1 gpm · 80.0 L/min	—	—
Pressure declared	3,481 psi · 240 bar	3,017–3,220 psi · 208–222 bar	differs
Three-point lift at ends declared	15,873 lb · 7,200 kg	16,755 lb · 7,600 kg	+6% 6620
Rear PTO speeds declared	540 rpm / 1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,607 lb · 5,265 kg	13,040 lb · 5,915 kg	+12% 6620
Maximum permissible mass declared	19,842 lb · 9,000 kg	20,944 lb · 9,500 kg	+6% 6620
Wheelbase declared	110.5 in · 2,806 mm	104.3 in · 2,650 mm	+6% 9125 a
Length declared	188.6 in · 4,790 mm	185.2 in · 4,705 mm	—
Width declared	96.5 in · 2,450 mm	96.3 in · 2,445 mm	—
Height declared	115.4 in · 2,930 mm	113.2 in · 2,875 mm	—
Ground clearance declared	20.9 in · 530 mm	18.1 in · 460 mm	+15% 9125 a
Fuel tank declared	232.5 qt · 220.0 L	218.7 qt · 207.0 L	+6% 9125 a

Source

Source