Case-Steyr 9105 a vs Deutz-Fahr Agrotron 110 MK3

8 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

2000–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 9105 a and the Agrotron 110 MK3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-Steyr 9105 a and Deutz-Fahr Agrotron 110 MK3, field by field
Field	9105 a	Agrotron 110 MK3	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	Steyr-VALMET WD 428.80	Deutz. BF6M 1012 E	differs
Displacement declared	4.40 L	4.79 L	+9% Agrotron 110 MK3
Maximum torque declared	284 lb·ft · 385 N·m	306 lb·ft · 415 N·m	+8% Agrotron 110 MK3
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated, wet ZF multi-disc clutch, type T-7224	Hydraulically operated wet ZF multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	21.9 gpm · 83.0 L/min	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	—	13,713 lb · 6,220 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	11,056 lb · 5,015 kg	11,045 lb · 5,010 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	99.4 in · 2,526 mm	104.2 in · 2,647 mm	—
Length declared	178.3 in · 4,530 mm	178.0 in · 4,520 mm	—
Width declared	96.5 in · 2,450 mm	90.7 in · 2,304 mm	+6% 9105 a
Height declared	112.2 in · 2,850 mm	113.0 in · 2,870 mm	—
Ground clearance declared	17.7 in · 450 mm	20.5 in · 520 mm	+16% Agrotron 110 MK3
Fuel tank declared	232.5 qt · 220.0 L	285.3 qt · 270 L	+23% Agrotron 110 MK3

Source

Source