CASE-INTERNATIONAL 995 (DT) vs VALMET 6350 HiTech

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and VALMET 6350 HiTech, field by field
Field	995 (DT)	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	IHC D-268	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	4.39 L	4.40 L	—
Maximum torque declared	221 lb·ft · 299 N·m	—	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	18.5 gpm · 70.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,901 psi · 200 bar	+8% 6350 HiTech
Three-point lift at ends declared	5,351 lb · 2,427 kg	12,346 lb · 5,600 kg	+131% 6350 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	10,516 lb · 4,770 kg	+61% 6350 HiTech
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	91.6 in · 2,326 mm	—
Length declared	151.4 in · 3,845 mm	180.5 in · 4,585 mm	+19% 6350 HiTech
Width declared	73.0 in · 1,854 mm	92.3 in · 2,345 mm	+26% 6350 HiTech
Height declared	105.1 in · 2,670 mm	110.2 in · 2,800 mm	—
Ground clearance declared	22.0 in · 559 mm	17.1 in · 434 mm	+29% 995 (DT)
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	118.3 qt · 112.0 L	174.4 qt · 165.0 L	+47% 6350 HiTech

Source

Source