CASE-INTERNATIONAL 995 (DT) vs Deutz-Fahr AgroStar 4.68

12 material differences

Tractor one

1990–1993

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the AgroStar 4.68 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and Deutz-Fahr AgroStar 4.68, field by field
Field	995 (DT)	AgroStar 4.68	Gap
Engine
Engine power, claimed claimed	88.8 hp	90 hp	—
Engine declared	IHC D-268	KHD BF4L 913	differs
Displacement declared	4.39 L	4.09 L	+7% 995 (DT)
Maximum torque declared	221 lb·ft · 299 N·m	259 lb·ft · 351 N·m	+17% AgroStar 4.68
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	13.0 gpm · 49.2 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	8,378 lb · 3,800 kg	+57% AgroStar 4.68
Rear PTO speeds declared	540/1000 rpm	540/1000/750 rpm	differs
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	9,259 lb · 4,200 kg	+42% AgroStar 4.68
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	88.0 in · 2,235 mm	96.5 in · 2,450 mm	+10% AgroStar 4.68
Length declared	151.4 in · 3,845 mm	168.2 in · 4,272 mm	+11% AgroStar 4.68
Width declared	73.0 in · 1,854 mm	90.2 in · 2,290 mm	+24% AgroStar 4.68
Height declared	105.1 in · 2,670 mm	108.7 in · 2,762 mm	—
Ground clearance declared	22.0 in · 559 mm	18.3 in · 465 mm	+20% 995 (DT)
Fuel tank declared	118.3 qt · 112.0 L	139.5 qt · 132 L	+18% AgroStar 4.68

Source

Source