CASE-INTERNATIONAL 895 (DT) vs VALMET 900

11 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the 900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and VALMET 900, field by field
Field	895 (DT)	900	Gap
Engine
Engine power, claimed claimed	82 hp	88.8 hp	+9% 900
Engine declared	IHC D-268	VALMET 420 DS or DSRE	differs
Displacement declared	4.39 L	4.40 L	—
Maximum torque declared	209 lb·ft · 284 N·m	—	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	14.7 gpm · 55.7 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	7,419 lb · 3,365 kg	+39% 900
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	7,408 lb · 3,360 kg	+8% 900
Wheelbase declared	88.0 in · 2,235 mm	88.3 in · 2,244 mm	—
Length declared	142.0 in · 3,607 mm	152.6 in · 3,877 mm	+7% 900
Width declared	78.0 in · 1,981 mm	85.7 in · 2,177 mm	+10% 900
Height declared	97.4 in · 2,474 mm	106.3 in · 2,700 mm	+9% 900
Ground clearance declared	22.0 in · 559 mm	19.9 in · 505 mm	+11% 895 (DT)
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	118.3 qt · 112.0 L	83.5 qt · 79.0 L	+42% 895 (DT)

Source

Source