CASE-INTERNATIONAL 895 (DT) vs SOMECA 880 (TD)

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1975–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the 880 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and SOMECA 880 (TD), field by field
Field	895 (DT)	880 (TD)	Gap
Engine
Engine power, claimed claimed	82 hp	86.8 hp	+6% 880 (TD)
Engine declared	IHC D-268	O.M.-FIAT CO-3/75	differs
Displacement declared	4.39 L	4.56 L	—
Maximum torque declared	209 lb·ft · 284 N·m	—	—
Transmission
Top speed declared	21.7 mph · 35 km/h	15.5 mph · 25 km/h	+40% 895 (DT)
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Dry FERODO or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	—	7.1 gpm · 27.0 L/min	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	4,608 lb · 2,090 kg	+16% 895 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	6,493 lb · 2,945 kg	+6% 895 (DT)
Maximum permissible mass declared	—	12,897 lb · 5,850 kg	—
Wheelbase declared	88.0 in · 2,235 mm	96.7 in · 2,457 mm	+10% 880 (TD)
Length declared	142.0 in · 3,607 mm	155.4 in · 3,946 mm	+9% 880 (TD)
Width declared	78.0 in · 1,981 mm	77.6 in · 1,970 mm	—
Height declared	97.4 in · 2,474 mm	104.3 in · 2,650 mm	+7% 880 (TD)
Ground clearance declared	22.0 in · 559 mm	18.9 in · 480 mm	+16% 895 (DT)
Turning radius, braked declared	—	12.4 ft · 3.79 m	—
Fuel tank declared	118.3 qt · 112.0 L	122.6 qt · 116.0 L	—

Source

Source