CASE-INTERNATIONAL 895 (DT) vs SAME Explorer 80 (DT)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the Explorer 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and SAME Explorer 80 (DT), field by field
Field	895 (DT)	Explorer 80 (DT)	Gap
Engine
Engine power, claimed claimed	82 hp	78.9 hp	—
Engine declared	IHC D-268	SAME 1000.4 A 1	differs
Displacement declared	4.39 L	4.00 L	+10% 895 (DT)
Maximum torque declared	209 lb·ft · 284 N·m	193 lb·ft · 261 N·m	+9% 895 (DT)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	10.7 gpm · 40.5 L/min	—
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	7,606 lb · 3,450 kg	+42% Explorer 80 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	6,614 lb · 3,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	95.1 in · 2,415 mm	+8% Explorer 80 (DT)
Length declared	142.0 in · 3,607 mm	145.2 in · 3,687 mm	—
Width declared	78.0 in · 1,981 mm	73.6 in · 1,870 mm	+6% 895 (DT)
Height declared	97.4 in · 2,474 mm	102.1 in · 2,593 mm	—
Ground clearance declared	22.0 in · 559 mm	20.5 in · 520 mm	+8% 895 (DT)
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	118.3 qt · 112.0 L	105.7 qt · 100.0 L	+12% 895 (DT)

Source

Source