CASE-INTERNATIONAL 895 (DT) vs Renault Ceres 335

11 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

2000–2004

71.7 hp

Measured at the PTO · OECD Test 1969

Which should you choose?

Read our verdict on the 895 (DT) and the Ceres 335 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and Renault Ceres 335, field by field
Field	895 (DT)	Ceres 335	Gap
Measured performance
PTO power, measured measured	—	71.7 hp	—
Drawbar power, measured measured	—	60.9 hp	—
Engine
Engine power, claimed claimed	82 hp	—	—
Engine declared	IHC D-268	John Deere 4045 DRT 51	differs
Displacement declared	4.39 L	4.53 L	—
Maximum torque declared	209 lb·ft · 284 N·m	221 lb·ft · 299.2 N·m	+5% Ceres 335
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	13.5 gpm · 51.1 L/min	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	9,061 lb · 4,110 kg	+69% Ceres 335
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	8,113–8,289 lb · 3,680–3,760 kg	differs
Maximum permissible mass declared	—	12,919 lb · 5,860 kg	—
Wheelbase declared	88.0 in · 2,235 mm	95.8–97.2 in · 2,433–2,470 mm	differs
Length declared	142.0 in · 3,607 mm	176.4 in · 4,481 mm	+24% Ceres 335
Width declared	78.0 in · 1,981 mm	73.2 in · 1,860 mm	+7% 895 (DT)
Height declared	97.4 in · 2,474 mm	101.8 in · 2,586 mm	—
Ground clearance declared	22.0 in · 559 mm	16.5–19.3 in · 420–490 mm	differs
Turning radius, braked declared	—	12.5–13.3 ft · 3.80–4.05 m	—
Fuel tank declared	118.3 qt · 112.0 L	158.5 qt · 150.0 L	+34% Ceres 335

Source

Source