CASE-INTERNATIONAL 895 (DT) vs Massey Ferguson MF 4245 (A)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the MF 4245 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and Massey Ferguson MF 4245 (A), field by field
Field	895 (DT)	MF 4245 (A)	Gap
Engine
Engine power, claimed claimed	82 hp	83.9 hp	—
Engine declared	IHC D-268	Perkins 1004.4 TLR	differs
Displacement declared	4.39 L	3.99 L	+10% 895 (DT)
Maximum torque declared	209 lb·ft · 284 N·m	214 lb·ft · 290 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Pedal operated dry air cooled single plate clutch	differs
Hydraulics & hitch
Pressure declared	—	3,104–3,481 psi · 214–240 bar	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	7,408 lb · 3,360 kg	+38% MF 4245 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	7,915 lb · 3,590 kg	+15% MF 4245 (A)
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	92.5 in · 2,350 mm	—
Length declared	142.0 in · 3,607 mm	157.9 in · 4,010 mm	+11% MF 4245 (A)
Width declared	78.0 in · 1,981 mm	78.3 in · 1,990 mm	—
Height declared	97.4 in · 2,474 mm	103.5 in · 2,630 mm	+6% MF 4245 (A)
Ground clearance declared	22.0 in · 559 mm	11.4 in · 290 mm	+93% 895 (DT)
Fuel tank declared	118.3 qt · 112.0 L	196.5 qt · 186.0 L	+66% MF 4245 (A)

Source

Source