9 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 895 (DT)1990–1993No measured PTO figureTractor twoHürlimann H-86 XAfrom 2005No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the H-86 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and Hürlimann H-86 XA, field by field
Field	895 (DT)	H-86 XA	Gap
Engine
Engine power, claimed claimed	82 hp	82 hp	—
Engine declared	IHC D-268	Hürlimann 1000.4 WT-6 E	differs
Displacement declared	4.39 L	4.00 L	+10% 895 (DT)
Maximum torque declared	209 lb·ft · 284 N·m	235 lb·ft · 318 N·m	+12% H-86 XA
Transmission
Top speed declared	21.7 mph · 35 km/h	24.9 mph · 40 km/h	+14% H-86 XA
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Pedal-operated dry SDF single-disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	12.7 gpm · 48.0 L/min	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	6,967 lb · 3,160 kg	—
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	86.0 in · 2,185 mm	—
Length declared	142.0 in · 3,607 mm	155.5 in · 3,950 mm	+10% H-86 XA
Width declared	78.0 in · 1,981 mm	80.7 in · 2,050 mm	—
Height, over the cab declared	97.4 in · 2,474 mm	96.9 in · 2,460 mm	—
Ground clearance declared	22.0 in · 559 mm	15.0 in · 380 mm	+47% 895 (DT)
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 895 (DT)

Source

Source