11 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 885 (DT)1985–1990No measured PTO figureTractor twoVALMET 705/705-41983–1989No measured PTO figure
Which should you choose?
Read our verdict on the 885 (DT) and the 705/705-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 885 (DT) | 705/705-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 82 hp | 82 hp | — |
| Engine declared | IHC D-268 | VALMET TD 44 DS 7 | differs |
| Displacement declared | 4.39 L | 4.40 L | — |
| Maximum torque declared | 218 lb·ft · 296 N·m | 235 lb·ft · 318 N·m | +7% 705/705-4 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-disc clutch | Pedal-operated, dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.7 gpm · 48.0 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 3,191 psi · 220 bar | +18% 705/705-4 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,645 lb · 3,014 kg | 8,356 lb · 3,790 kg | +26% 705/705-4 |
| Wheelbase declared | 88.0 in · 2,235 mm | 93.9 in · 2,385 mm | +7% 705/705-4 |
| Length declared | 125.2 in · 3,180 mm | 177.8 in · 4,515 mm | +42% 705/705-4 |
| Width declared | 69.3–89.0 in · 1,760–2,260 mm | 83.9 in · 2,130 mm | differs |
| Height, over the cab declared | 94.5 in · 2,400 mm | 105.1 in · 2,670 mm | +11% 705/705-4 |
| Ground clearance declared | 18.1 in · 460 mm | 18.8 in · 478 mm | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 190.2 qt · 180.0 L | +61% 705/705-4 |
CASE-INTERNATIONAL 885 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 885”
- Source: Traktorenlexikon, “Case-IH 4230”
VALMET 705/705-4 sources
Source
- Source: Traktorenlexikon, “Valmet 705”