CASE-INTERNATIONAL 695 (DT) vs Steyr 8085 a RS-2

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1988–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the 8085 a RS-2 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and Steyr 8085 a RS-2, field by field
Field	695 (DT)	8085 a RS-2	Gap
Engine
Engine power, claimed claimed	72.0 hp	71 hp	—
Engine declared	IHC D-239	Steyr WD-411.44	differs
Displacement declared	3.91 L	3.46 L	+13% 695 (DT)
Maximum torque declared	163 lb·ft · 221 N·m	195 lb·ft · 265 N·m	+20% 8085 a RS-2
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Dry Fichtel & Sachs double clutch or Luk	differs
Hydraulics & hitch
Pump flow declared	—	10.7 gpm · 40.5 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	5,732 lb · 2,600 kg	+7% 8085 a RS-2
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	6,393 lb · 2,900 kg	+7% 695 (DT)
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	88.0 in · 2,235 mm	84.4 in · 2,145 mm	—
Length declared	151.4 in · 3,845 mm	144.9 in · 3,680 mm	—
Width declared	73.0 in · 1,854 mm	73.7 in · 1,871 mm	—
Height declared	105.1 in · 2,670 mm	89.4 in · 2,270 mm	+18% 695 (DT)
Ground clearance declared	—	15.6 in · 395 mm	—
Fuel tank declared	118.3 qt · 112.0 L	63.4 qt · 60.0 L	+87% 695 (DT)

Source

Source