CASE-INTERNATIONAL 695 (DT) vs SAME Dorado 75 (DT)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

2000–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the Dorado 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and SAME Dorado 75 (DT), field by field
Field	695 (DT)	Dorado 75 (DT)	Gap
Engine
Engine power, claimed claimed	72.0 hp	71 hp	—
Engine declared	IHC D-239	SAME-DEUTZ-FAHR 1000.4 A 5	differs
Displacement declared	3.91 L	4.00 L	—
Maximum torque declared	163 lb·ft · 221 N·m	204 lb·ft · 276 N·m	+25% Dorado 75 (DT)
Transmission
Top speed declared	21.7 mph · 35 km/h	24.9 mph · 40 km/h	+14% Dorado 75 (DT)
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Pedal-operated dry S.D.F. single-plate clutch	differs
Hydraulics & hitch
Pressure declared	2,698 psi · 186 bar	2,176 psi · 150 bar	+24% 695 (DT)
Three-point lift at ends declared	5,351 lb · 2,427 kg	6,393 lb · 2,900 kg	+19% Dorado 75 (DT)
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	5,864 lb · 2,660 kg	+17% 695 (DT)
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	88.0 in · 2,235 mm	—
Length declared	151.4 in · 3,845 mm	151.6 in · 3,850 mm	—
Width declared	73.0 in · 1,854 mm	75.6 in · 1,920 mm	—
Height declared	105.1 in · 2,670 mm	95.3 in · 2,420 mm	+10% 695 (DT)
Ground clearance declared	—	17.5 in · 445 mm	—
Turning radius, braked declared	—	10.5 ft · 3.20 m	—
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 695 (DT)

Source

Source