CASE-INTERNATIONAL 695 (DT) vs Ford 5610
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 695 (DT) and the 5610 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 695 (DT) | 5610 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 72.0 hp | 71 hp | — |
| Engine declared | IHC D-239 | — | — |
| Displacement declared | 3.91 L | — | — |
| Maximum torque declared | 163 lb·ft · 221 N·m | 181 lb·ft · 245 N·m | +11% 5610 |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 18.6 mph · 30 km/h | +17% 695 (DT) |
| Clutch declared | Pedal-operated dry Rockford single-plate clutch designed as driving clutch | Pedal-actuated, dry Borg & Beck single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.6 gpm · 36.4 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift at ends declared | 5,351 lb · 2,427 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,832 lb · 3,099 kg | 6,047 lb · 2,743 kg | +13% 695 (DT) |
| Wheelbase declared | 88.0 in · 2,235 mm | 87.5 in · 2,223 mm | — |
| Length declared | 151.4 in · 3,845 mm | 107.1 in · 2,720 mm | +41% 695 (DT) |
| Width declared | 73.0 in · 1,854 mm | 76.4 in · 1,940 mm | — |
| Height declared | 105.1 in · 2,670 mm | 100.8 in · 2,560 mm | — |
| Ground clearance declared | — | 18.5 in · 470 mm | — |
| Turning radius, braked declared | — | 10.9 ft · 3.32 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 84.0–112.0 qt · 79.5–106.0 L | differs |
CASE-INTERNATIONAL 695 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 695”
- Source: Traktorenlexikon, “Case-IH 4210”
Ford 5610 sources
Source
- Source: Traktorenlexikon, “Ford 5610”