11 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 685 (DT)1985–1990No measured PTO figureTractor twoDeutz-Fahr D 7207 (C)1980–1984No measured PTO figure
Which should you choose?
Read our verdict on the 685 (DT) and the D 7207 (C) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 685 (DT) | D 7207 (C) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68.0 hp | 68 hp | — |
| Engine declared | IHC D-239 | KHD F4L 912 | differs |
| Displacement declared | 3.91 L | 3.77 L | — |
| Maximum torque declared | 176 lb·ft · 238 N·m | 181 lb·ft · 245 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated dry single-plate clutch, designed as drive clutch | Independent dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.8 gpm · 59.8 L/min | 10.5 gpm · 39.6 L/min | +51% 685 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,836 lb · 2,647 kg | 6,437 lb · 2,920 kg | +10% D 7207 (C) |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 95.0 in · 2,414 mm | +12% D 7207 (C) |
| Length declared | 141.6 in · 3,597 mm | 158.3 in · 4,020 mm | +12% D 7207 (C) |
| Width declared | 72.4–90.6 in · 1,840–2,300 mm | 78.3 in · 1,990 mm | differs |
| Ground clearance declared | — | 22.8 in · 580 mm | — |
| Turning radius, braked declared | 10.3 ft · 3.15 m | 12.5 ft · 3.81 m | +21% D 7207 (C) |
| Fuel tank declared | 118.3 qt · 112.0 L | 95.1–97.2 qt · 90–92 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
CASE-INTERNATIONAL 685 (DT) sources
- Source: Traktorenlexikon, “Case-IH 685”
- Source: Traktorenlexikon, “Case-IH 4210”
Deutz-Fahr D 7207 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 7207”
- Source: Traktorenlexikon, “Deutz D 6006”