CASE-INTERNATIONAL 595 (DT) vs ZETOR 4321/4341 Super

11 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 595 (DT) and the 4321/4341 Super → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 595 (DT) and ZETOR 4321/4341 Super, field by field
Field	595 (DT)	4321/4341 Super	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.1 hp	—
Engine declared	IHC D-206	ZETOR Z-6202	differs
Displacement declared	3.38 L	3.92 L	+16% 4321/4341 Super
Maximum torque declared	162 lb·ft · 220 N·m	147 lb·ft · 199 N·m	+11% 595 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-disc clutch	Pedal-operated driving clutch with 310 mm disc diameter	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	11.4 gpm · 43.0 L/min	—
Pressure declared	—	3,191 psi · 220 bar	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	8,768 lb · 3,977 kg	+99% 4321/4341 Super
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,440 lb · 2,921 kg	6,889 lb · 3,125 kg	+7% 4321/4341 Super
Maximum permissible mass declared	—	11,905 lb · 5,400 kg	—
Wheelbase declared	84.5 in · 2,146 mm	88.9 in · 2,257 mm	—
Length declared	142.0 in · 3,607 mm	132.7 in · 3,370 mm	+7% 595 (DT)
Width declared	75.0 in · 1,905 mm	75.8 in · 1,925 mm	—
Height declared	96.5 in · 2,451 mm	103.9 in · 2,640 mm	+8% 4321/4341 Super
Ground clearance declared	22.1 in · 561 mm	16.1 in · 408 mm	+38% 595 (DT)
Turning radius, braked declared	11.7 ft · 3.56 m	11.8 ft · 3.60 m	—
Fuel tank declared	80.0 qt · 75.7 L	126.8 qt · 120.0 L	+59% 4321/4341 Super

Source

Source