CASE-INTERNATIONAL 595 (DT) or SAME Explorer 60 II (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 595 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 60 II (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The SAME Explorer 60 II (DT) suits loader and hydraulic implement work better on this data: 14% (280 kg / 617 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 595 (DT) | Explorer 60 II (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 44.1 kW (59.1 hp)Traktorenlexikon, “Case-IH 595” | 44.1 kW (59.1 hp)Traktorenlexikon, “SAME Explorer II 60” | Not comparableNot comparable on power at the PTO shaft: the 595 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 60 II (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 595 (DT) and the Explorer 60 II (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 595 (DT) and the Explorer 60 II (DT). |
| Which pumps more oil for implements? | — | 28.5 L/min (7.5 gpm)Traktorenlexikon, “SAME Explorer II 60” | No figureNo call on hydraulic flow: no figure on record for the 595 (DT). |
| Which lifts more on the three-point hitch? | 2,000 kg (4,409 lb)Traktorenlexikon, “Case-IH 595” | 2,280 kg (5,027 lb)Traktorenlexikon, “SAME Explorer II 60” | AheadThe SAME Explorer 60 II (DT) has 14% more lift (280 kg / 617 lb) than the CASE-INTERNATIONAL 595 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,921 kg (6,440 lb)Traktorenlexikon, “Case-IH 595” | 2,540 kg (5,600 lb)Traktorenlexikon, “SAME Explorer II 60” | Ahead (a fact, not an advantage)The CASE-INTERNATIONAL 595 (DT) is 15% heavier (381 kg / 840 lb) than the SAME Explorer 60 II (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 595 (DT) and the Explorer 60 II (DT). |
| Which has the wider choice of gears? | 8 to 16Traktorenlexikon, “Case-IH 595” | 15 to 20Traktorenlexikon, “SAME Explorer II 60” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 595 (DT) and the Explorer 60 II (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 595” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “SAME Explorer II 60” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case-IH 595” | 540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Explorer II 60” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH 595” | independentTraktorenlexikon, “SAME Explorer II 60” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Case-IH 595” | Two-wheel or four-wheel driveTraktorenlexikon, “SAME Explorer II 60” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1990–1993 | 1989–1998 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SAME Explorer 60 II (DT) has 14% more lift (280 kg / 617 lb) than the CASE-INTERNATIONAL 595 (DT) (both lift at the hitch ends, as stated by the source).
- The CASE-INTERNATIONAL 595 (DT) is 15% heavier (381 kg / 840 lb) than the SAME Explorer 60 II (DT) (both unladen weight, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 595 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 60 II (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources