CASE-INTERNATIONAL 595 (DT) vs Renault 61-12 RS

7 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1984–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 595 (DT) and the 61-12 RS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 595 (DT) and Renault 61-12 RS, field by field
Field	595 (DT)	61-12 RS	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.3 hp	—
Engine declared	IHC D-206	MWM D 226-3	differs
Displacement declared	3.38 L	3.12 L	+9% 595 (DT)
Maximum torque declared	162 lb·ft · 220 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry Laycock single-disc clutch	Dry VALEO double clutch	differs
Hydraulics & hitch
Pump flow declared	—	9.4 gpm · 35.5 L/min	—
Pressure declared	—	1,595 psi · 110 bar	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	6,305 lb · 2,860 kg	+43% 61-12 RS
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,440 lb · 2,921 kg	6,453 lb · 2,927 kg	—
Wheelbase declared	84.5 in · 2,146 mm	89.2 in · 2,265 mm	+6% 61-12 RS
Length declared	142.0 in · 3,607 mm	143.3 in · 3,639 mm	—
Width declared	75.0 in · 1,905 mm	71.7 in · 1,820 mm	—
Height declared	96.5 in · 2,451 mm	100.1 in · 2,543 mm	—
Ground clearance declared	22.1 in · 561 mm	14.4 in · 367 mm	+53% 595 (DT)
Turning radius, braked declared	11.7 ft · 3.56 m	11.8 ft · 3.60 m	—
Fuel tank declared	80.0 qt · 75.7 L	102.5 qt · 97.0 L	+28% 61-12 RS

Source

Source