CASE-INTERNATIONAL 585 (DT) vs Leyland 262
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 585 (DT) and the 262 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 585 (DT) | 262 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 62.1 hp | — |
| Engine declared | IHC D-206 | LEYLAND-MOTORS 4/98 DT | differs |
| Displacement declared | 3.38 L | 3.77 L | +11% 262 |
| Maximum torque declared | 162 lb·ft · 220 N·m | 165 lb·ft · 224 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry Laycock single disc clutch | Dry Borg & Beck double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.3 gpm · 31.3 L/min | — |
| Three-point lift at ends declared | 4,409 lb · 2,000 kg | 4,136 lb · 1,876 kg | +7% 585 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,639 lb · 2,558 kg | 6,724 lb · 3,050 kg | +19% 262 |
| Wheelbase declared | 78.0 in · 1,981 mm | 80.0 in · 2,032 mm | — |
| Length declared | 141.6 in · 3,597 mm | 146.9 in · 3,730 mm | — |
| Width declared | 73.2 in · 1,859 mm | 78.7 in · 2,000 mm | +8% 262 |
| Height declared | 96.5 in · 2,451 mm | 97.6 in · 2,480 mm | — |
| Ground clearance declared | — | 14.8 in · 377 mm | — |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 10.5 ft · 3.19 m | +12% 585 (DT) |
| Fuel tank declared | 80.0 qt · 75.7 L | 72.1 qt · 68.2 L | +11% 585 (DT) |
CASE-INTERNATIONAL 585 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 585”
- Source: Traktorenlexikon, “Case-IH 3230”
Leyland 262 sources
Source
- Source: Traktorenlexikon, “Leyland 262”
- Source: Traktorenlexikon, “Leyland 255”