CASE-INTERNATIONAL 585 (DT) vs John Deere 2100 (A)

8 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 585 (DT) and the 2100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 585 (DT) and John Deere 2100 (A), field by field
Field	585 (DT)	2100 (A)	Gap
Engine
Engine power, claimed claimed	59.1 hp	56 hp	—
Engine declared	IHC D-206	ZETOR 6201	differs
Displacement declared	3.38 L	3.46 L	—
Maximum torque declared	162 lb·ft · 220 N·m	148 lb·ft · 200 N·m	+10% 585 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated dry Laycock single disc clutch	Dry Zetor double clutch	differs
Hydraulics & hitch
Pump flow declared	—	8.4 gpm · 31.8 L/min	—
Pressure declared	—	1,160 psi · 80 bar	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	6,393 lb · 2,900 kg	+45% 2100 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,639 lb · 2,558 kg	6,581 lb · 2,985 kg	+17% 2100 (A)
Maximum permissible mass declared	—	12,125 lb · 5,500 kg	—
Wheelbase declared	78.0 in · 1,981 mm	88.8 in · 2,256 mm	+14% 2100 (A)
Length declared	141.6 in · 3,597 mm	148.0 in · 3,760 mm	—
Width declared	73.2 in · 1,859 mm	70.9 in · 1,800 mm	—
Height declared	96.5 in · 2,451 mm	103.9 in · 2,640 mm	+8% 2100 (A)
Ground clearance declared	—	17.0 in · 432 mm	—
Turning radius, braked declared	11.7 ft · 3.56 m	—	—
Fuel tank declared	80.0 qt · 75.7 L	74.0 qt · 70.0 L	+8% 585 (DT)

Source

Source